vibr — Easier-to-use user-controllable vibrato.


Easier-to-use user-controllable vibrato.


kout vibr kAverageAmp, kAverageFreq, ifn


ifn -- Number of vibrato table. It normally contains a sine or a triangle wave.


kAverageAmp -- Average amplitude value of vibrato

kAverageFreq -- Average frequency value of vibrato (in cps)

vibr is an easier-to-use version of vibrato. It has the same generation-engine of vibrato, but the parameters corresponding to missing input arguments are hard-coded to default values.


Here is an example of the vibr opcode. It uses the file vibr.csd.

Example 856. Example of the vibr opcode.

See the sections Real-time Audio and Command Line Flags for more information on using command line flags.

; Select audio/midi flags here according to platform
; Audio out   Audio in    No messages
-odac           -iadc     -d     ;;;RT audio I/O
; For Non-realtime ouput leave only the line below:
; -o vibr.wav -W ;;; for file output any platform

; Initialize the global variables.
sr = 44100
kr = 4410
ksmps = 10
nchnls = 1

; Instrument #1.
instr 1
  ; Create a vibrato waveform.
  kaverageamp init 7500
  kaveragefreq init 5
  ifn = 1
  kvamp vibr kaverageamp, kaveragefreq, ifn

  ; Generate a tone including the vibrato.
  a1 oscili 10000+kvamp, 440, 2

  out a1


; Table #1, a sine wave for the vibrato.
f 1 0 256 10 1
; Table #1, a sine wave for the oscillator.
f 2 0 16384 10 1

; Play Instrument #1 for 2 seconds.
i 1 0 2


See Also

jitter, jitter2, vibrato


Author: Gabriel Maldonado

Example written by Kevin Conder.

New in Version 4.15