massign — Assigns a MIDI channel number to a Csound instrument.


Assigns a MIDI channel number to a Csound instrument.


massign ichnl, insnum[, ireset]
massign ichnl, "insname"[, ireset]


ichnl -- MIDI channel number (1-16).

insnum -- Csound orchestra instrument number. If zero or negative, the channel is muted (i.e. it doesn't trigger a csound instrument, though information will still be received by opcodes like midiin).

insname -- A string (in double-quotes) representing a named instrument.

ireset -- If non-zero resets the controllers; default is to reset.


Assigns a MIDI channel number to a Csound instrument. Also useful to make sure a certain instrument (if its number is from 1 to 16) will not be triggered by midi noteon messages (if using something midiin to interpret midi information). In this case set insnum to 0 or a negative number.

If ichan is set to 0, the value of insnum is used for all channels. This way you can route all MIDI channels to a single Csound instrument. You can also disable triggering of instruments from MIDI note events from all channels with the following line:

massign 0,0

This can be useful if you are doing all MIDI evaluation within Csound with an always on instrument(e.g. using midiin and turnon) to avoid doubling the instrument when a note is played.


Here is an example of the massign opcode. It uses the file massign.csd.

Example 410. Example of the massign opcode.

See the sections Real-time Audio and Command Line Flags for more information on using command line flags.

; Select audio/midi flags here according to platform
-odac  -+rtmidi=virtual -M0    ;;;realtime audio out and realtime midi in 
;-iadc    ;;;uncomment -iadc if realtime audio input is needed too
; For Non-realtime ouput leave only the line below:
;-o massign.wav -W ;;; for file output any platform

sr = 44100
ksmps = 32
nchnls = 2
0dbfs  = 1

giengine fluidEngine
; soundfont path to manual/examples
isfnum	 fluidLoad "19Trumpet.sf2", giengine, 1
	 fluidProgramSelect giengine, 1, isfnum, 0, 56

massign 0,0	;disable triggering of all instruments on all channels, but
massign 12,10	;assign instr. 10 to midi channel 12
massign 3,30	;assign instr. 30 to midi channel 3

instr 10
; only on midi channel 12
	mididefault   60, p3
	midinoteonkey p4, p5
ikey	init p4
ivel	init p5
	fluidNote giengine, 1, ikey, ivel

instr 30 
; only on midi channel 3
icps cpsmidi
asig oscils .6, icps, 0
     outs asig, asig 

instr 99
; output sound from fluidengine
imvol  init 7
asigl, asigr fluidOut giengine
       outs asigl*imvol, asigr*imvol

i 10 0 2 60 100 ;play one note from score and...
i 30 2 2
i 99 0 60	;play virtual keyboard for 60 sec.


See Also



Author: Barry L. Vercoe - Mike Berry
MIT, Cambridge, Mass.

New in Csound version 3.47

ireset parameter new in Csound5

Thanks goes to Rasmus Ekman for pointing out the correct MIDI channel range.