MixerClear

MixerClear — Resets all channels of a buss to 0.

Syntax

          
            MixerClear
          
        

Description

Resets all channels of a buss to 0.

Performance

Use of the mixer requires that instruments setting gains have smaller numbers than instruments sending signals, and that instruments sending signals have smaller numbers than instruments receiving those signals. However, an instrument may have any number of sends or receives. After the final signal is received, MixerClear must be invoked to reset the busses to 0 before the next kperiod.

Examples

instr 220 ; Master output
    ; It applies a bass enhancement, compression and fadeout
    ; to the whole piece, outputs signals, and clears the mixer.
  a1  MixerReceive 220, 0
  a2  MixerReceive 220, 1
  ; Bass enhancement
  al1 butterlp a1, 100
  al2 butterlp a2, 100
  a1 = al1*1.5 + a1
  a2 = al2*1.5 + a2 

  ; Global amplitude shape
  kenv   linseg 0., p5 / 2.0, p4, p3 - p5, p4, p5 / 2.0, 0.
  a1=a1*kenv
  a2=a2*kenv 
  
  ; Compression
  a1 dam a1, 5000, 0.5, 1, 0.2, 0.1  
  a2 dam a2, 5000, 0.5, 1, 0.2, 0.1  
  
  ; Remove DC bias
  a1blocked dcblock		a1
  a2blocked	dcblock		a2
  
  ; Output signals
  outs a1blocked, a2blocked
  MixerClear
endin

Credits

Author: Michael Gogins (gogins at pipeline dot com).